YOU ARE NOW AT: SE-TOOL UPDATES PAGE
Setools updates v1.1411
Tuesday, 16 December 2014

Code:
- alternative security bypass for SEMC PDA's was not fixed fully. should be fine now

Download Setools v1.1411


Setools v1.1410
Monday, 15 December 2014

- alternative security bypass for SEMC PDA's was broken, fixed. Download Setools v1.1410


Setools v1.1409
Thursday, 4 December 2014

Code:
Implemented boot restore for msm8x10 phones using EDL mode.

There was ~10 reports that xperia_e1 phones for unknown reason lose s1boot after successful flashing. Now you can repair boot of such phones :

Select check signed mode + altbypass mode, select "D20xx_XPERIA E1" as model, Add to fw area corresponding APP, eLabel, FSP, CDF and press flash.

When you prompted to attach/detach testpoint - just press "ready"

Download link


SEtools v1.1408
Monday, 28 July 2014

-some loaders updated to current versions.
- better simlock information display for s1 phones
- small cosmetic fixes

Download SEtools v1.1408


Setools v1.1407
Tuesday, 24 June 2014

24-06-2014 Setools v1.1407

Code:
- some loaders updated to current versions.
- now you can unlock/repair/rebuild hwconfig m1_aspen. Check docs\s1_qualcomm_uart_cables for uart pinout.

Download Setools v1.1407


SEtools v1.1406
Saturday, 15 March 2014

Code:
- added msm8210 phones support ( D20xx_XPERIA E1, etc )
- added msm8974ab phones support ( D65xx_XPERIA Z2, etc )
- due to multiple requests, added IMEI change procedure for msm722xA phones. Cost is 2 credits.
procedure is very same as msm8x55-based phones :
options : signed mode + altbypass mode + perform full unlock + allow to change , procedure : unlock/repair

Restrictions :
1. after IMEI change you will not be able to flash phone with anything other, than setool2
2. you MUST unlock phone after IMEI change ( can be done in one step ) , so total cost is 2+2 credits.
3. you must reflash phone or perform factory reset from phone service menu to bring new IMEI in effect.
4. if anything will go wrong, you will receive dead phone, which can only be recovered by jtag tools.

Download SEtools v1.1406


Setools v1.1405
Thursday, 30 January 2014

Code:
- boot update procedure implemented, this will prevent dead phones/no imei phones during firmware upgrade/downgrade
procedure. Officially approved now on my own z1 phone.
- added msm8226 phones support
- fixed bug "can't get S1 hdr" during boot of some phones
- fixed zlib bug : firmware will not be flashed, if there is not enough space on hard

Download Setools v1.1405


Setools v1.1404
Monday, 2 December 2013

- Changed internal ADB server tcpip port, this can help to avoid ADB connection errors during second step of msm8250,msm7227,msm722xA altbypass unlock, when other programs interfering with setool2.

Download Setools v1.1404


Setools v1.1403
Wednesday, 20 November 2013

- approved sony msm722xA-based phones alternative bypass unlock.
- completely changed interface with android debug bridge.
- fixed some internal bugs.

Download Setoolsv1.403


Setools v1.1302
Saturday, 5 October 2013

- fixed altbypass operations on SEMC DB2020-based phones on USB interface ( were broken long time ago )
- fixed possible altbypass operation error on SEMC A2-based phones
- another few models names were added to prevent users confusion

Download Setools v1.1302


Setools v1.1301
Saturday, 31 August 2013

Code:
- added mtk6589-based phones support ( network unlock requires s1 server to be online )

Download Setools v1.1301


SEtools v1.1300
Sunday, 28 July 2013

- added msm8974-based phones support ( network unlock requires s1 server to be online )
- small cosmetic fixes

Download SEtools v1.1300


Setools v1.1299
Friday, 14 June 2013

- Verified and fixed msm8230-based phones support
- Fixed altbypass unlock for msm8655-based phones
- Updated some loaders

Download Setools v1.1299


Setools v1.1298
Thursday, 25 April 2013

- Added support for msm8230-based phones ( network unlock requires s1 server to be online )

Download Setools v1.1298


Update Setools v1.1297
Thursday, 11 April 2013

- few PDA models added to list
- some loaders updated
- small fixes

Download Setools v1.1297


Setools v1.1296
Tuesday, 19 March 2013

- Added support for apq8064-based phones ( network unlock requires s1 server to be online )
- Some loaders updated
- Small fixes

Download Setools v1.1296


Setools v1.1295
Monday, 24 December 2012

- critical bug fixed : hwconfig can't be written during altbypass repair operation
- some small fixes

Download Setools v1.1295


Setools Updates v1.1294
Wednesday, 5 December 2012

- critical bug fixed : some firmware files for old s1 phones was not accepted
- added s1v2 lock information
- some small fixes

Download Setools Updates v1.1294


Setools Updates v1.1293
Saturday, 24 November 2012

- added support for msm7227A phones. ( network unlock require s1 server to be online )
- highly reduced memory usage when flashing s1 phones
- some small bugfixes

Download Setools Updates v1.1293


LgEtools v1.78.1
Saturday, 8 September 2012

Added IMEI reapir for over 50 Samsung models.
Added new useful features, and interface improvements.
Added unlock codes calculation for AT&T HTC.

Download LgEtools v1.78.1


SEtools Update v1.1292
Wednesday, 8 August 2012

- added support for msm7225A phones. ( network unlock require s1 server to be online )

Download SEtools v1.1292


setools v1.1291
Saturday, 4 August 2012

- msm7227,qsd8250 altbypass unlock using USB was broken somehow. fixed. greatly sorry.
- backup folder will be created now for j108 bypass during step 2, no need to make identify before procedure now.
- pnx5230 altbypass unlock could kill some phones ( theoretically ). fixed.

Download setools v1.1291


Setools v1.1290
Friday, 3 August 2012

- added support for msm8960-based somc phones ( network unlock only supported via s1 server)


Setools v1.1289
Sunday, 24 June 2012

- fixed android-based unlock, daemon not started on some systems
- fixed credits loss issue, when user unlocking s1_open phone and s1 server became busy in the middle of process

Download Setools v1.1289.rar


Setools v1.1288
Saturday, 16 June 2012

- fixed recovery procedure for totally erased x10 phones
- fixed ESN recovery for corresponding phones

Download Setools v1.1288.rar


Setools v1.1287
Saturday, 26 May 2012

- fixed unlock problems with some sharp 3g phones.
- added secunits backup during j108 bypass procedure
- misc cosmetic changes

Download Setools v1.1287.rar


Setools v1.1286
Friday, 27 April 2012

- added quite complex, but working procedure to unlock last SEMC A2 phone, j108 cedar from network locks. beginners, stay away from this procedure. other users, welcome to faq for details.
- STE U8500 sony phones supported ( lt22,mt26,st25 ). Standard operations supported - flash,trim area read/write. Network unlock only supported using s1 signature server, which is offline for us. STE U8500 support was done blindly, should work, but need to be tested.

Download Setools v1.1286.rar


Setools v1.1280
Thursday, 19 April 2012

- fixed m1_aspen flashing
- fixed flashing of ICS firmwares for 8x55 phones
- removed java-based altbypass method for all a1 phones,except pnx5230-based phones.
- reset-based unlock method is now standard altbypass unlock method for a1 phones.
you can not use usb as interface for altbypass unlock on db2000,db2010-based phones anymore.
you do not need restoration files,bypass files ( still need them for pnx5230-based phone ).
and ... altbypass unlock is much quicker and quite "one-buttoned" now ;)
- added x1 unlock via codes, all you need - enter IMEI on locks tab and press "request". Cost is 1 credit.

due to major core rewrite, some bugs can appear in a1 phone service patterns, despite i checked all supported phones in different modes.

if you will find problems, feel free to report them on forum

Download Setools v1.1280.rar


FIS+ Update v0.2.4 READY [ World First !!! ]
Friday, 6 April 2012

Hi to all Auto-Polar community
This is our last update for FIS+ and FIS+ Advanced customers :

Polar FIS+ - Firmware Update v0.2.4

[+] Improved communication routines for diagnostic functions.
[+] Improved communication and problem solved with the menu heater (Auxiliary heating) in the FIS for which the menu disappeared on some vehicles.
[+] Improved emulation feature Parktronic OPS (only brand Skoda).
[+] Fixed problem with shutdown of the box, which after turning it off from the menu, then would not turn to holding down the OK button.
[+] Added new feature that identifies and shows the tab menu INFO Polar FIS reference of the gateway installed in the vehicle.
[+] Added new parameters :
[-] Injection duration (Diesel)
[-] Injection start quantity (Diesel)
[-] Angle delay.

[+] Added support for hands-free OEM units of WHITE FIS (BETA VERSION) (WORLD FIRST and EXCLUSIVE !!!)

What means compatibility with hands-free OEM units ?? This emulation allows mounting in a vehicle with red FIS, a unit of BT as they ride the latest vehicles with white box and see the menu Phone in the FIS.

What are the advantages of BT unit mount a white box ?? The main advantage that BT has a white box unit is AD2P audio feature which lets you play music through the phone and listen through the speakers of the car radio. Apart from this, the control units for white box, equipped with chips and newer versions of software so that its operation is more stable and effective.

How i must enable this compatibility mode ?? After entering the setup menu Polar FIS, go to the menu DISPLAY-> DISPLAY-> EMUL. BT and then activate the function. After activated, the function is not available immediately, so it starts working after enabling it, you must close the vehicle and wait 1 minute after the screen goes FIS. From then you can make contact and start and run correctly. This step is only necessary after enabling this function, then no longer necessary.

Finally, note that this function has been tested with several models of BT's exchanges, but it's still a BETA version, so even if we do not expect any problems, may arise in this case, please contact with us and will be solved as soon as possible.

IMPORTANT NOTE : Polar FIS performs only the function of support for this unit can create the menu and Phone in the FIS can see your messages, all functions including Agenda, connection, audio AD2P ultimately depend on the compatibility of the phone and radio, as in the other ECUs BT, Parrot, etc.


Smartcard update released for v1.1204 software.
Wednesday, 4 April 2012

Smartcard update released for v1.1204 software.

or any credits to service any qualcomm-based semc phone,
which supported for altbypass method.
that means, you can unlock,repair, rebuild hwconfig for free, without any internet connection.

all settings and procedures are same as usual, but internet connection no more required, if card is updated.

semc qualcomm-based phones, which supported by altbypass, are:

WT18,LT15a,LT15at,LT15i,E15a,E15i,MT15a,MT15i,WT18i,Z1i, IS07,IS11S,ST18a,ST18i,MK16a,MK16i,ST17a,ST17i,SK17a,SK17i,X10a,X10i ST15a,ST15i,MT11a,MT11i,SO-01B,SO-02C,SO-01C,U20a,U20i, E10a,E10i,E16a,E16i,WT19a,WT19i,LT18a,LT18i,R800a,R800at,R800i,R800x update is paid, cost 20 setool2 credits.

it is DOES NOT matter, if card was already activated or updated to work with >1.107 version.

LGTool will be activated and uploaded automatically during process.


Setools Updates v1.1204
Thursday, 29 March 2012

- fixed "dead phone after unlock" for some latest j20 phones.
- x10 with android firmware 2.3.3 supported for altbypass unlock
- msm8x60 sony phones supported ( lt26,lt28,is12s,so-03d ). Standard operations supported - flash,trim area read/write.
Network unlock only supported using s1 signature server, which is offline for us.
- added support for one interesting activation.


Download Setools Updates v1.1204


Setools v1.1203
Friday, 9 December 2011

- testpoint altbypass method will work now for msm7227-based phones,which using MCUs with fixed security bug. that means, resurrection cables will work for MCUs with fixed security bug.
- fixed problem with FOTA upgrade for msm8x55-based phones, unlocked by altbypass

Download


Setools v1.36
Friday, 11 November 2011

More when 40 new phones are supported by LGtool now!
10 new LG models added world first: AS680, AS855, C729, E730, E739, LU6500, P693, P860, SU870, T575!
Instant unlock by IMEI/ESN/MSN for LG, Alcatel, Motorola and Huawei phones still free!

Added models:
LG: VS760, US760
- Read/Write SPC
- Read/Write MEID
- Read/Write ESN
- Read/Write Min2/Min1
- Read/Write Sid/Nid
- Read/Write Phone number(MDN)
- Read/Write SSD_A, SSD_B
- Read/Write AKEY
- Read/Write OTKSL
- Read/Write BlueTooth address
- Read/Write PRL(if a model has it)
- Read/Write ERI(if a model has it)
- Read User Lock Code
- File explorer(beta)

LG: SH650, SH400, SH210, KH2100
- Read/Write NVM
- Factory reset
- Unlock
- Repair bluetooth
- Repair IMEI

LG: SU600, SH130
- Read/Write NVM
- Factory reset
- Unlock
- Repair IMEI

LG: A210AN, AS680, AS855, C729, C729DW, C729DWP, C800DG, C800VL, C800DGP, C800VLP, E510G, E730, E730F, E739,
E739BK, E739KW, E739KWP, E739BKP, F100L, GT365GO2, L55C, LG221C, LU6500, P509P, P690F, P693, P860, P999P,
SU870, T575, VN271PP, VN271SS

- Calculate unlock codes

Huawei: G6005
- Calculate unlock codes

New features:

LG: RD6160, LG6160, RD6210, LG6210, RD6300, LG6300
- Refurbish (Erase filesystem and write necessary system files)
- After firmware is complete, necessary files will be written into the phone

-changes in file explorer:
- root node has been added. Now all operations in root folder can be executed using this node.
- recursive folder deleting has been added

-Added reading Service Password in GetInfo function.
This password used on some CYON phones to enter unlock menu.
On some CYON phones you can press key "0" in Main Menu and then enter Service Password.
In Service Menu you can select "NW Password" item to enter Unlock Code.

Bugs fixed:

- Slow work on some PC has been fixed.
- Brom.dll bug fixed

Download Link
Alt Download Link


Setools v1.1202
Sunday, 6 November 2011

WORLD FIRST support of Android phones with new protection (fixed security bug)!

- no testpoint altbypass unlock procedure will work now for msm7227-based phones,which using MCUs with fixed security bug.
resurrection cables will NOT work for MCUs with fixed security bug. Because of this,
phones, which are already dead should be recovered using jtag box, which can write ORIGINAL semc boot.
big thanks for help and testing to electrolandgsm.
- switch to usb interface was broken for DB200x phones, fixed.
- added few models to list, so users can use profiles for them.


Download link
Alt Download link


Setools v1.1201
Thursday, 27 October 2011

- resurrection procedure will now work for totally erased s1 qualcomm-based phones FAQ now have resurrection procedure example.

- forgot to post, that starting from v1.12 setool2 will check for faulty cypress-based reader and refuse to run, if setool2 smartcard installed in such reader.
There is no any workaround.
Use omnikey-based reader or other normal reader.

Download link
Alt Download link


setools v1.12
Tuesday, 25 October 2011

- added altbypass support for xperia arc_s model, in other words, phones with 8255T chipset fully supported.
- added resurrection support for s1 qualcomm-based phones with totally damaged security zone.
resurrection procedure will be described in FAQ later,
however, in short it is standard "recovery+write gdfs+unlocking" chain.

7227,8250-based phones require special uart cables ( pinout included in docs ),
however it is highly recommended to use special GPG cables
8x55-based phones does not require any special cables.

as side effect, imei change possible now for s1 qualcomm-based phones.
for 7227,8250-based phones need select COM as interface, options are:
( signed mode, altbypass mode, do full unlock, allow to change imei when unlocking, use testpoint (gnd type) )
for 8x50-based phones need select USB as interface, options are:
( signed mode, altbypass mode, do full unlock, allow to change imei when unlocking )

cost of imei change 5 credits, please take in mind, that if you change imei, phone need to be unlocked,
so add another 5 credits for unlock procedure.
if you have calculated signature for some imei, then you can save 5 credits for unlocking ;)

- added few models to model list, so users don't get confused
- different bugfixes

Download link
Alt Download link


WARNING !!!
Monday, 26 September 2011

WARNING !!!

As there is too much "blocked" setool2 GEMALTO TOP cards,we investigated issue and found problem.

due to errors in controller firmware ( or due to incompatibility between smartcard/controller firmware/motherboard usb controller ) all smartcard readers i know, which are based on CY7C63001 are failed to send long data packet to/from smartcard.
it happens on some systems only, it can happen not immediately, but on "affected" system it happens always, earlier or later.

due to that, smartcard will receive WRONG command and SETOOL2 WILL BE "BLOCKED". THAT IS NOT RELATED TO "BLOCKED CARDMANAGER" ISSUE ( ERROR #6982 )

i can not find ANY solution to that problem, other than NOT using Cypress CY7C63001-based readers with setool2 cards.


Setools v1.1108
Tuesday, 13 September 2011

- from now on, unlock by altbypass method for qsd8250,msm7227 phones will also "unlock" semcboot.
- qsd8250,msm7227 phones with "unlocked" bootloader can flash custom firmwares now
- added few models to model list, so users don't get confused
- different bugfixes, some are important.

Download link
Alt link


Setools v1.1107
Tuesday, 23 August 2011

- again improved recovery for 8x55-based phones.

recovery of phones with totally damaged both semcboot and trim area properly supported now.

Setools_v1.1107.rar
Setools_v1.1107.rar


please redownload Setools v1.1106
Monday, 22 August 2011

please redownload Setools v1.1106 from support area or from below link : due to hurry, 8x55 unlock was broken.

Setools v1.1106.rar
Setools v1.1106.rar


Setools v1.1106
Sunday, 21 August 2011

- improved semcboot recovery for 8x55-based phones.
- implemented script operations, format trim area operations, dump flash operations for 8x55 phones using
alternative security bypass method. That allow fix phones with damaged trim area and many other interesting features. - simplified 8x55-based phones unlock, now need connect phone

Setools_v1.1106.rar
Setools_v1.1106.rar


Setools v1.1104
Monday, 15 August 2011

- added unlock code request by IMEI. request cost - 10 credits, turnaround maximum 3 days.

how to do: go to LOCKS tab, fill IMEI, press "REQUEST" button. after ~1 day, check if request done: again fill IMEI and press request. if code will not be ready in 72 hours from request, credits will be automatically returned to account, when user check credits information.

Setools_v1.1104.rar
Setools_v1.1104.rar


important news
Sunday, 7 August 2011

LGTool now absolutely free for all setool2 users, who activated their cards. just press "activate lg" in updater ( use updater/updater as login/password )


Setools v1.1101
Sunday, 7 August 2011

- added lt15,mt15,r800 (and other semc models based on MSM8255) unlock using alternative security bypass. check FAQ post for all details. procedure require internet access and paid.
- added pnx4910-based phones support (ck15_txt_pro at the moment).
supported all standard operations, network unlock, as usual, will only work when s1 signature server will work. - fixed

SETOOL2 SMARTCARD UPDATE REQUIRED, ONLY IF YOU STILL NOT DONE IT.
Download Setools v1.1101.rar
Download Setools v1.1101.rar


SETool Update v1.1099
Tuesday, 26 July 2011

- added e10,e15,e16,u20 unlock using alternative security bypass. check FAQ post for all details. procedure require internet access and paid.

1. download setool2 v1.1099

2. make sure you have firmware with android 2.x, NOT 1.6. flash required firmware, if needed.

3. power on phone without sim card, go to menu->settings->applications->development, enable "usb debugging" connect phone to PC, install drivers from setool2 v1.1099 distr ( drivers\ADB_Drivers)

hint: i suggest to import DisableADBNumbering.reg, however that is not required.

4. select proper phone model. on settings check signed mode, use alternative security bypass, do full unlock instead usercode reset press unlock

follow program directions.

hint: when program tells "warming up...", manually power on phone fully, cause it will automatically enter charging mode.

after you see "GETTING ROOT ACCESS ..." DO NOT TOUCH PHONE until procedure complete.

it can happen ( very unlikely, though ) that ADB server will not recognize phone after reboot, so IF phone not detecting automatically and on status bar you can see "waiting for phone...", again - only in that case - disconnect phone from usb and connect it again, procedure should continue.

if not, well, repeat from start.

5. during testing period procedure will be free, however testing period will be very short ( until i wake up ) and credits will be taken after that,depending on testing results.

we tested service thoroughly and all went fine, but... well, you got idea. no any warranty, your phone can be killed,etc,etc,etc.

Download SETool v1.1099
Download SETool v1.1099


Setools Updates v1.1094
Monday, 11 July 2011

- finally sorted all all issues with samsung cid26 emp-based phones.
- added x10i,x10a,so-01b unlock using alternative security bypass. check FAQ post for all details.
during promo period, cost is 0 ( zero ) credits. Promo period can be extended to forever.
- fixed many minor and major bugs.
SETOOL2 SMARTCARD UPDATE REQUIRED, IF YOU STILL NOT DONE IT.

Setools v1.1094.rar
Setools v1.1094.rar


Setools v1.107
Thursday, 9 June 2011

- gemalto TOP cards supported from now on
- SmartCard update required to use that and following setool2 versions

Download link 1
Download link 2


v1.106
Monday, 25 April 2011

- generic customization for A1,A2 phones, custpack info was broken, fixed
- old batch of smartcards was ignored, fixed

Download link 1
Download link 2


v1.105
Sunday, 24 April 2011

- added support for qc8255-based semc phones (arc,neo,play) ( network unlock, flashing, trim area operations )


Setools v1.104
Sunday, 23 January 2011

- fixed script processing for SEMC A2 phones with damaged filesystem

Download link 1
Download link 2


Setools v1.103
Wednesday, 12 January 2011

- CCPU reset procedure could fail on some DB200X-based PDA phones, fixed.
- A2 loaders for SEMC phones updated to current versions

Download link 1
Download link 2


Setools v1.102
Thursday, 6 January 2011

- flashing of DB200x-based PDA was broken in v1.01, fixed

Download link 1
Download link 2


Setools v1.101
Wednesday, 5 January 2011

- ancient bug (from very start of s1 patch unlock )with patch unlock of z250 was fixed.
- updated loaders for few phone models
- few minor internal changed

Download link 1
Download link 2


Setools v1.10
Monday, 20 December 2010

- updated loaders for few phone models
- general bugfixes
- few minor interface improvements

Download Link 1
Download Link 2


setools v1.09
Tuesday, 5 October 2010

- w100 unlock by codes made simple - now you just need to check signed mode, altbypass and press unlock.
- few cosmetic fixes,few minor functionality improvements

Download link 1
Download link 2


v1.089
Thursday, 9 September 2010

- lg u8550 operations were broken from some version,fixedM
- few cosmetic fixes

Download link 1
Download link 2


setoolsv1.088
Saturday, 4 September 2010

added unlock code request for w100 mobiles - and that is just start.

- we need special 12-digit serial number, NOT IMEI
- that special number can be readout during identify procedure for w100, starting from 1.088 version
- put 12-digit serial number in serial field on locks tab, press "request" button. if serial can be found, you will receive codes.
- cost of successful request - 1 credits.

fixed very rare "auth error" problem
few cosmetic fixes

Download link 1
Download link 2


Setools v1.087
Monday, 30 August 2010

v1.087

- samsung m5650 support was broken from ~1.08x version, fixed.

Download link 1
Download link 2


Setools v1.086
Monday, 23 August 2010

Setools v1.086

- added support for w100_spiro, network unlock is disabled at the moment
- updated model list
- different bugfixes

Download link 1
Download link 2


v1.085
Wednesday, 21 July 2010

Code:
- updated a2 loaders
- updated s1 loaders
- different cosmetic bugfixes

Download link 1
Download link 2


v1.084
Saturday, 17 July 2010

Code:
- lg gt40x phones unlock/repair/flash functionality now works as intended, check FAQ for details
- no need to reflash after unlock some specific lg db3200-based phones from now on
- lg db3200-based phones now can utilize full USB2.0 speed
- further decreased memory usage during flashing of x1-alike phones
- different cosmetic bugfixes

Downlink 1
Downlink 2


Setools v1.081
Thursday, 24 June 2010

Setools v1.081

- increased server communication timeouts, can help in case of timeout errors
- different cosmetic bugfixes

Downlink 1
Downlink 2


Setools v1.08
Wednesday, 16 June 2010

- x10mini support added.
yes, network unlock still unavailable for public.
do not ask us for special x10-enabled accounts - they not exists.

- different bugfixes

Download Link 1
Download Link 2


Setools v1.07
Tuesday, 18 May 2010

- fatal flashing bug fixed.
odm phones, pda phones was affected.
greatly sorry for inconveniences.

- memory consumption decreased while flashing x10 phones.

Download link 1
Download link 2


setools v1.06
Tuesday, 18 May 2010

- added support for qsd8250-based semc phones (x10 at the moment).
flashing,gesture lock reset,trim area read/write is standalone and free
please note, high quality usb cable required to work with x10.
network unlock is server-based and paid.
x10 network unlock disabled for public at the moment.

- added support for a2 cid81 phones.
flashing,user lock reset,gdfs area read/write is standalone and free
network unlock is server-based and paid.

- few cosmetic fixes

Downlaod link 1
Download link 2


Setools v1.05
Wednesday, 14 April 2010

- some newer ODM firmwares were not parsed properly, fixed
- few cosmetic fixes

Download Link 1 - Setools_v1.05.rar
Download Link 2 - Setools_v1.05.rar


Setools v1.04
Monday, 12 April 2010

- added support for samsung m5650 phone.
it is absolutely necessary to select correct model, otherwise phone will be trashed. always add main part of firmware first when flashing.
- added unlock codes calculation for samsung s5320,m5650 phones.
select correct model, check signed mode, press unlock.
it is absolutely necessary to select correct model, otherwise nothing good will be done.
thx to zoio,GeniuSShadoW for testing.
- a2 emptyboard fill procedure now works as intended
- fixed support for unlock a2 cid80 phones, when signature server offline
- fixed few minor bugs
- updated drivers

Download Link 1 - Setools_v1.04.rar
Download Link 2 - Setools_v1.04.rar


Setools Software Paid Updates V1.03
Tuesday, 30 March 2010

- broken db2000,db2010 red cid49 support unsigned mode, fixed.

Download Link 1 - Setools_v1.03
Download Link 2 - Setools_v1.03
Download Link 3 - Setools_v1.03


Setools Software Paid Updates V1.02
Monday, 29 March 2010

- added preliminary support for a2 cid26 phones (s5320 at the moment) at the moment, network unlock possible by flashing special firmware from support samsung s5320 should be connected with "9+#" pressed in order to enter boot mode. all other functions supported without notable exceptions.

- added a2 db3150,db3200,db3210 emptyboard fill support. you need special cable in order to successfully write OTP chip, +7.5v should be applied to DCIO (charger pin, pin 12)


activation required in order to use that update.
just unpack 1.02.rar in existing setool2 directory
( setool2.ini not included in dist anymore, so your password/username will not be overwritten)
and run activator.exe.
i strongly advice users to run only activator.exe which included in v1.02 archive or from below

Download Link 1 - Setools Activator Here
Download Link 2 - Setools Activator Here

Activation cost 20 credits.

Get Your Setools Credits Here

activation will assure that you will be able to use latest setool2 updates and use new support area. old support area will be frozen, no new flash files will be uploaded on it. also, old support area will be terminated in that year

thanks for your support.

Download Link 1 - v1.02
Download Link 2 - v1.02

You can also get the Setools Collection by Click Here

Get Your Setools Here


setool v1.01 FINAL
Sunday, 14 March 2010

- fixed a2 cid80 support

Download Link 1 - setool v1.01 FINAL
Download Link 2 - setool v1.01 FINAL
Download Link 3 - setool v1.01 FINAL


v1.0 FINAL
Friday, 12 March 2010

- added standalone support for reset operation, alternative security bypass for next chipsets:

supported s1 aid 0001,0002,0003.
supported a1/a2 cid 16,29,36,49,50,51,52,53,80

Code:
s1 omap
s1 locosto
s1 neptune
db 200x
db 201x
db 2020
db 3150
db 3200
db 3210
db 3350

Setools_Final_v1.0.rar


v0.915062
Friday, 26 February 2010

- broken pnx5230 support,fixed
- solved "starting up..." hang issue when user installed usbflash drivers, but not connected any phone yet.

Download v0.915062.rar


v0.915061
Thursday, 25 February 2010

- added support for S1 AID04 neptune-based phones.
there is no alternative security bypass for such phones, so only full network unlock supported.
- added support for A2 CID80.
there is no alternative security bypass for such phones, so only full network unlock supported.
- few bugfixes.

Download v0.915061.rar


v0.915060
Saturday, 13 February 2010

- broken calypso lite support, fixed
- further fixes for alternative bypass support

Download v0.915060


setool update v0.915059
Friday, 12 February 2010

- broken db200x PDA support, fixed
- broken alternative bypass support, fixed

Download v0.915059


v0.915058
Thursday, 11 February 2010

- added support for repair erom on semc new security locosto, neptune phones.
procedure:
1. select correct model
2. on settings check "signed mode"
3. add erom to firmware tab.
if you have neptune based phone: 1207-7713_EROM_S1_NEPTUN_HS_SEMC_SIMLOCK_R7A024.sin
if you have locosto based phone, then select situable from:
J132_EROM_S1_LOCOSTO_HS_USB_R5A038_64k.sin
K330_T280_T270_EROM_S1_LOCOSTO_HS_R5A028.sin
R300_R306_T303_S1_LOCOSTO_HS_R5A031_128.SIN
T250_CXC1250616_EROM_S1_LOCOSTO_HS_R5A022.sin
Z250_Z320_EROM_S1_LOCOSTO_HS_R5A023.sin
4.press recovery

procedure require internet connection and paid: locosto based - 1 credit, neptune based - 2 credits.

- added support for high speed usb flashing. flashing speed of semc a2 phones will be twice as usual.
- some bugs fixed, one was very important

Download v0.915058.rar


v0.915057
Tuesday, 1 December 2009

- added support for repair dead db3200-based lg phones (gt505,etc)

procedure:
if /sys partition damaged
(you CAN'T read gdfs, eraseSecData errors)
add to firmware area gt505_syspart_fix.ssw
press flash
unlock phone
fullflash phone

if /drm partition damaged
(phone blinks on lg logo after /sys repair and you CAN read gdfs)
add to firmware area gt505_drm_fix.ssw
press flash
unlock phone
fullflash phone

- added support for repair semc a2 phones with flash cid>otp cid
procedure:
check "use signed mode",
"use alternative security bypass",
"use preloader security bypass"
press unlock
credits consumption same as a2 cid53 unlock feature.

Download V0.915057


v0.915056
Friday, 6 November 2009

- added full support for s1_open PDA phones (satio).
big thanks to: cowboy, hardstone, shadowman,kris.sg for testing, arash for logo.

notes:

in order to boot satio you MUST check "signed mode" read flash requires "signed mode" and "alternative bypass" checked. satio omap nand flash starts at 8000000

to execute network unlock/repair - check both "signed mode" and "perform full unlock" then press unlock

to reset user code - check only signed mode and press unlock if "unlock after flash" checked - user code will be reset after flashing.

to flash satio you must add zip package to firmware area. do not unzip it !!!! just add.

- added possibility of generating new password for account.

Download v0.915056


v0.915053
Friday, 9 October 2009

- a2 cid53 alternative bypass will not damage device key anymore. because of that one more phone restart required, but who cares ?

- "unlock during flash" enabled for s1 phone patch unlock

- some not important fixups, thx to imobile for bugreports.

Download v0.915053


v0.915052
Thursday, 8 October 2009

- tested,fixed and apporved support for db3350 phones, thx to imobile
as my "dear friends" used to say: world first, genuine,blablabla,etc.
anyway, i'm sure everything works now for db3350 -
- full signature unlock
- altbypass mode
- flashing,filesystem,gdfs,trim area operations.

- regarding a2 cid53 phones:
use full signature unlock for FULLY GENUINE unlock.
it is fast and furious (tm)
use alternative bypass mode for completely damaged phones.
it is slower, but can fix any software problem.

in next 2-3 days i will release next version, which will not damage
device key in a2 cid53 phones when using alternative bypass mode.
(need to arrange reset station upgrade, that require some time)

in any way, i strongly recommend to use full signature unlock for
a1/a2 phones - it is absolutely genuine and can not tamper anything.

v0.915052


v0.915051
Monday, 28 September 2009

- added full support for upcoming semc db3350 phones. as there are no phones on market, we can not test it, so support for db3350 marked as HIGHLY EXPERIMENTAL.

flashing/gdfs/filesystem operations should work flawlessly. full unlock via signature and "alternative bypass mode" SHOULD work too, but that things are absolutely not tested, so MAKE GDFS BACKUP before doing full unlock and only touch alternative security bypass if you absolutely crazy ;) in any case, if phone will be killed - i will repair it for sure... well, you have been warned.

please note, that alternative security bypass for a2 db3350 cid53 IS NOT free and NOT STANDALONE (check prices for details)

please note, that if you will execute alternative bypass mode for a2 cid53 in order to unlock/flash/etc - you will lose device key and drm functions possible will be damaged.

- in some VERY RARE cases lg db3200 phones became completely dead after unlock attempt or unlock/flashing procedure failed in start. that should be fixed now, at least i received many good reports.

Download v0.915051


v0.915050
Saturday, 19 September 2009

- added alternative security bypass for semc a2 cid53 phones.
that allow you to repair completely dead a2 cid53 phones:
- destroyed trim area
- foreign gdfs
- damaged semcboot

please note, that alternative security bypass for a2 cid53 IS NOT free and NOT STANDALONE (check prices for details)

please note, that if you will execute alternative bypass mode for a2 cid53 in order to unlock/flash/etc - you will lose device key and drm functions possible will be damaged.

usage of a2 cid53 alternative security bypass exactly same as for a2 cid49/52 and explained in details in FAQ.

Download v0.915050


v0.915045
Saturday, 12 September 2009

- fixed brown db201x handling.

Download v0.915045


v0.915044
Friday, 11 September 2009

- fixed EROM UPGRADE feature for db2020 phones.
it will be active when no settings set and RECOVERY pressed. thx to arash for reporting.

- fixed s1 flash readout in .ssw mode, thx to kokoka for discovering.

Download v0.915044


v0.915043
Wednesday, 9 September 2009

v0.915043
- added RESET mode for db200x,db201x,db2020 phones. after such operation phone will became developer (brown) state. you can do anything with phone (write gdfs, unlock,etc) while phone in that state.

you can find all details in FAQ

- as side effect, pda emptyboard fill now enabled.

- added PATCH unlock for S1 phones (new security, old security, etc) notice, that phones must have NOT TAMPERED security zone. you can find all details in FAQ

please note, that it is PATCH unlock and after fullflash phone will be locked again.

same thing applies to possible incorrect operation - just flash phone.


- as side effect, added possibility to flash unsigned firmware in any S1 phone. that allow users to repair phones with damaged trim area. that require s1 signature server, hopefully it will be online one day.
-------------------------


that is very-very beta software.
s1 patch unlock should be tested throughly.
we tested t303,t250,t280,r300,w302 but not other models,though they
should be supported just fine.

because of that, during short beta testing period price for s1 security bypass, db200x,db201x,db2020 reset operation will be ZERO credits.

after short beta testing period we will setup corresponding price.

Download Download v0.915043.rar


v0.915040
Friday, 28 August 2009

- fixed csca activation for a2 phones

Download Here


v0.915039
Thursday, 23 July 2009

- signed mode S1 loaders updated to support latest AID versions
- some not important bugfixes and addons

Download v0.915039


v0.915038
Thursday, 11 June 2009

- timeout for A2 flashing increased, that fixed error
"can't get NET header" on some models in the end of filesystem flashing
- unsigned mode A2 loaders updated to latest versions
- some not important bugfixes

Download v0.915038


v0.915037
Saturday, 30 May 2009

- model list updated
- signed mode A2 loaders updated to latest versions
- some not important bugfixes

Download v0.915037


v0.915036
Thursday, 14 May 2009

- fixed phonebook extraction for some old models
- by accident db3200 cid49,51,52 alternative bypass was broken,fixed
- bug with horizontal scrolling fixed (hopefully)


v0.915035
Monday, 4 May 2009

- updated model list
- updated bypass packages
- added support for db3200 cid49,cid51,cid52 alternative security bypass
- added support for db3200,db3210 cid53 flashing,gdfs operations,etc
- added support for db3200,db3210 cid53 unlocking
(via signature server, at the moment 2 credits required)
1. select phone model
2. mark "signed mode", "do full unlock instead usercode reset"
3. press "unlock/repair"


- added CORRECT PDA ACPU EROM recovery support for all PDA.
1. select correct PDA model
2. find corresponding EROM in dist\eroms\, add it to firmware area
3. select correct com/ufs port
4. press recovery
5. connect turned off phone
6. reflash phone via USB with normal firmware
- added script support for S1 phones in signed mode (trim area operations)
- added security units auto backup for S1 phones in signed mode
- few minor bugs fixed/added
- few gui enhancements

Download v0.915035


v0.915034
Friday, 20 February 2009

- pda support was broken,fixed
- fixed fs operations for pnx5230 on serial interfaces
- added timer for new-type testpoints processing
- minor gui fixes/addons

Download v0.915034


v0.915033
Thursday, 12 February 2009

- "gnd"-type testpoint was broken,fixed (thx to aamir zia for report)
- a2 loaders updated to current version
- bypass packages updated
- some minor not important changes


v0.915032
Saturday, 31 January 2009

- fixed "lg ku580" unlock bug (after unlock phone hangs on "lg logo" and repair flash was needed)
- some minor gui enhancements

Download v0.915032


v0.915031
Monday, 26 January 2009

- officially approved support for sagem a2 cid185,cid186 phones. die,kukuruzer (and other "developers") stealers (all you can do is steal and use ready stolen thing) a BIG thanks going to tayeb_am for cid185 support testing.
- added ECC mode selection for A2 phones. "mode 0" required for phone,damaged by kukuruzer (and other "things") for normal firmwares "mode 1" is required.
- fixed many minor and major bugs.
- added many minor bugs ;) maybe not ;)

Download v0.915031


v0.915030
Monday, 29 December 2008

- csca unlock was broken, fixed

Download v0.915030


v0.915029
Sunday, 28 December 2008

- a2 flashing speed increased ~15%
- enabled error correction protocol for semc a2 phones
- again lowered altbypass speed of locosto-based phones to 460800 ;)
- misc unimportant changes/cosmetic bugfixes


v0.915028
Thursday, 25 December 2008

- fixed critical bug with unsigned unlocking of r306 phone.
- added S1 erom collection, flash in UNSIGNED mode
- added latest rest bypass packages

Download v0.915028


v0.915027
Monday, 22 December 2008

- fixed cosmetic db2xxx gdfs write bug
- fixed bug with interface switching
- tested,fixed and approved support for lg db3200 cid54 phones
- lowered speed for locosto-based phones in alternative bypass mode
- removed experimental support for sagem a2 cid185,cid186 phones.
- added latest rest bypass packages


v0.915026
Monday, 15 December 2008

- fixed db201X recovery bug
- fixed nasty cosmetic bug in general unlock procedure
- still should be more bugs ;)

Download v0.915026


v0.915025
Sunday, 14 December 2008

- reintroduced direct unlock for telcel lg kf750/kf755
- added support for sagem my750x (experimental,released to test and fix)
- added support for lg kf757,lg ks520 (experimental,released to test and fix)
- added signed mode for locosto,neptune semc odm phones
"signed mode" should be checked
signed flashfiles should be used (uploaded on support)
possible flashing,userlock reset,total call time reset
network unlock not enabled (will be done later, via server)

note ! not all semc odm phones support USB (only latest)
note ! most odm phones in signed mode will work stable only on 460800 baudrate
note ! backups of trim area, made in signed and in unsigned mode
ARE NOT EXCHANGEABLE !!!!

- removed auto-ignition for semc odm phones when using 4in1 cable,
use manual ignition - that will eliminate troubles with booting that phones.
- latest bypass packages added
- misc bugfixes
- a lot of bugs, need to find and eliminate ;)


v0.915020
Tuesday, 18 November 2008

- solved issue with lg kf75x phones with '01xxxx' IMEIs such phones will be hanled and recognized automatically, but you must manually enter generated unlock code. unlock code can be entered by typing 2945#*750# (in some cases, it will not work until you flash generic (open) firmware)
- latest bypass packages added
- misc bugfixes

Download v0.915020


v0.915019
Tuesday, 11 November 2008

- possibility to repair total damaged a2 phones (err: 060101)
- latest bypass packages added
- misc bugfixes


please note.
there is common now to make mirrrors and etc of
setool2 updates.


v0.915018
Friday, 7 November 2008

- security backup was saved with wrong script command, fixed, thx to gbluez for reporting.


v0.915017
Sunday, 2 November 2008

- on some PNX5230 CID combination unlock by patch produced 5-locks units with "err:19" message. that is fixed now
- k600 loader produced weird version output, that is fixed.
- added trim area images for completely killed a2 phones (ta_forceopen err: 0006)

flash them as firmware. please note, that k850 trim area image only working for K850, while for any other semc a2-phone Shinobu_TA.ssw will do job just fine.

also please note, that for 100% normal work after trim area repair you must full flash phone, then write gdfs package from normal working phone, finally you must unlock phone.

i almost sure, thread with gdfs packages for a2 phone will appear soon.


v0.915016
Thursday, 30 October 2008

- updated phone model names
- updated bypass packages
- minor and major bugfixes
- added script command for visual filesystem manipulating.

- added support for j132 ODM SEMC phone

- added support for unlock/repair/domain change of ALL CURRENT SEMC A2 phones (cid49,51,52) solution is standalone. please FULLY read THIS POST

- added support for flash/fstools/unlock/repair of LG EMP-based phones, at the moment ku580/kf75x/kt52x (cid54) are supported.

- added support for flash/fstools/unlock/repair of SAGEM EMP-based phones, at the moment my850c (cid60) is supported.


v0.914039
Wednesday, 13 August 2008

- PDA gdfs write was broken, because of that almost all crucial operations with PDA phones not worked. fixed. thx to infogsm for report.


v0.914038
Wednesday, 13 August 2008

- added SCRC testpoint repair for db2012 phones.
supported CIDs : 50,51,52,53.
(db201x testpoint idea made by dre_ambox team).
usage:
1. it is only and only for professionals.
users,advanced users, please "go away".
2. testpoint is +3.3 voltage, connected to specific pin.
we suggesting to use +3.3v battery
(battery ground MUST be connected with phone's GROUND)
3. go to emptyboard fill & repair.
4. select needed db2012 model.
5. press "TP STAGE #1". read instructions and execute them.
6. phone is BROWN now.
7. now flash CORRECT db201x erom with needed CID.
NOTE, THAT EROM CID SHOULD BE >= OTP CID,OTHERWISE YOU WILL GET DEAD PHONE.
10. phone now retail,repaired and unlocked. fullflash phone as usual.
testpoint pictures (courtesy of drea_mbox team) included.
as all db201x shares same mcu, w200 testpoint picture is good
for all db201x phones.
IF YOU WROTE EROM WITH INCORRECT CID - USE "TP STAGE #2"

PLEASE NOTE, THAT CURRENT IMPLEMENTATION REQUIRES
VALID GDFS STRUCTURE. SO, IT SITUABLE ONLY FOR 5-LOCKS
REPAIR AND FULL STANDALONE UNLOCK.

- added all possible db201x eroms, now users can make cid50/51/52/53
phones from emptyboard phones
(not forget: add to firmware area gdfs_in_ssw FIRST and EROM LATEST)
- minor bugfixes.


v0.914037
Tuesday, 1 July 2008

- added testpoint for db2020 phones.
db2020 testpoint idea made by dre_ambox team.
as i respected that, i not included db2020 testpoint in setool2
for a long time. but anything ends sometime.
now, setool2 users can enjoy gdfs db2020 gdfs repair.

usage:
1. it is only and only for professionals.
users,advanced users, please "go away".
2. testpoint is +3.3 voltage, connected to specific pin.
we suggesting to use +3.3v battery
(battery ground MUST be connected with phone's GROUND)
3. go to emptyboard fill & repair.
4. select any db2020 model.
5. press "TP STAGE #1". read instructions and execute them.
6. press "TP STAGE #2". read instructions and execute them.
7. phone is BROWN now.
8. staying on "emptyboard fill and repair" write correct gdfs_in_ssw format.
9. if flashing went fine, flash db2020 erom with needed CID.
10. phone now retail and repaired. fullflash phone as usual.
testpoint pictures (courtesy of drea_mbox team) included.
after SETOOL2 db2020 testpoint procedure phone FULLY
working in "alternative security bypass" mode without ANY restrictions.


- greatly decreased locosto-based SEMC ODM phones security bypass time.
(instead ~50 seconds, now we have ~18 seconds)
- minor bugfixes.


v0.914037
Tuesday, 1 July 2008

- added testpoint for db2020 phones.
db2020 testpoint idea made by dre_ambox team.
as i respected that, i not included db2020 testpoint in setool2
for a long time. but anything ends sometime.
now, setool2 users can enjoy gdfs db2020 gdfs repair.

usage:
1. it is only and only for professionals. users,advanced users, please "go away".
2. testpoint is +3.3 voltage, connected to specific pin. we suggesting to use +3.3v battery (battery ground MUST be connected with phone's GROUND)
3. go to emptyboard fill & repair.
4. select any db2020 model.
5. press "TP STAGE #1". read instructions and execute them.
6. press "TP STAGE #2". read instructions and execute them.
7. phone is BROWN now.
8. staying on "emptyboard fill and repair" write correct gdfs_in_ssw format.
9. if flashing went fine, flash db2020 erom with needed CID.
10. phone now retail and repaired. fullflash phone as usual.
testpoint pictures (courtesy of drea_mbox team) included.
after SETOOL2 db2020 testpoint procedure phone FULLY
working in "alternative security bypass" mode without ANY restrictions.


v0.914036
Tuesday, 24 June 2008

- added support for new locosto-based ODM phones - T270,T280,R300,R306,T303,etc. supported flash,correct unlock by patch,usercode reset. be careful - select CORRECT model and CORRECT flashfiles.
- updated phone model names
- minor bugfixes


v0.914035
Wednesday, 11 June 2008

- updated a2 loaders to recent version
- updated supported flash types for locosto-based phones
- updated phone model names
- minor bugfixes


v0.914034
Thursday, 22 May 2008

- added FREE STANDALONE new alternative bypass method for db201x cid53 phones.

please note that due lack of all needed loaders,
"identify" for cid53 db201x phones will only work with DCU60.


v0.914033
Wednesday, 21 May 2008

- added FREE STANDALONE new alternative bypass method for db201x cid50/cid51, pnx5230 cid49/cid51, db2020 cid49/cid51. you DO NOT NEED logs for them anymore. PLEASE CHECK FAQ for important instructions.

- added all latest bypass packages


v0.914032
Friday, 16 May 2008

- not important bugfixes, just merged latest fixes in different modules.


v0.914031
Monday, 12 May 2008

- by request added pause after preparation part of new altbypass method.
please check FAQ for change in procedure.

- added possibility to create restoration files automatically.
for that, identify phone to find out what firmware inside.
then, add that firmware to firmware area and identify phone AGAIN.
rest file will be created if firmware is okay.

- added all latest BYPASS PACKAGES


v0.914030
Saturday, 10 May 2008

- "complete after flash" was broken when using new "alternative security bypass" mode. fixed
- "use preloader bypass mode" not allowed "unlock" operations. fixed
- memory overrun was present, which sometimes prevents phones from booting. fixed.


v0.914029
Friday, 9 May 2008

- added free,standalone,no testpoint, no additional expensive "tp cables"
alternative bypass method for following chipsets:
db201x cid52, db2020 cid52/cid53, pnx5230 cid52/cid53
all you need - is cheap TEST SIM CARD (or OPERATOR card)
please, see all details about that method in THAT FAQ post.
- fixed gdfs write problem in db201x brown phones
- added support for loader inside phone
(for QUICK patch/etc operations using new alternative bypass method)
for that, run "executor" in phone (menu->games), then check in settings
"use preloader security bypass" and then do desired operation.
- misc other bugfixes, maybe some bugs, check and report.


v0.914028/UNI
Friday, 21 March 2008

- added db2020 cid53 standalone flashing/usercode reset.
network unlock will work only via csca+signature servers.


v0.914026/UNI
Saturday, 15 March 2008

bugfixes,bugfixes...

- fixed cid52 OTP writing, was broken eons ego.
- added DB2020 emptyboards eroms, which are safe to use with EROM upgrade.
- pnx5230 support was broken, should be fixed, reports are welcome.
- changed usb support, perhaps will be better,perhaps not.
public testing will show results.
- some internal changes/bugs/bugfixes/etc


v0.914027/UNI
Tuesday, 11 March 2008

- usb multi-flashing was broken, fixed
- added separate cda handling for each model.
cda.ini format
[model]
description=cda_value
- misc gui changes


v0.914023/UNI
Saturday, 26 January 2008

- modified locosto hs bypass algo, should be better now
(previous algo sometimes producing "romboot not answering" error)
- added flash manufactured output for j110/j120/k200/k220 phones.
- operator digit was swapped in identify output.


v0.914022/UNI
Tuesday, 1 January 2008

- added support for Locosto-based SEMC ODM models: at present it is T250,Z320. supported both HS (red) and GP (brown) models, interfaces: com/ufs only

present features: flashing, flash read, userlock reset, network unlock (z320 is NOT rebooting after unlock :D ) TA (eeprom) backup auto-creating after each phone boot. be warned: booting of locosto-based phones is tricky process - perhaps, you will need to disconnect/connect cable/battery several times before phone will start booting. BE WARNED: always select correct model: z320 for z320 phones, t250 for t250 phones Keep TA backups ! if you somehow damage TA area and have no backup - you have dead phone

- fixed rare bug with "old security" pda phones (appears in 021 version)
- some gui changes/fixes/addons
- perhaps, added some bugs ;) so please test and report issues.


v0.914021/UNI
Thursday, 20 December 2007

- added full a2 unlock via server.

usage is extremly same as with cid52 db2012/cid2 pnx5230/cid53 P1:
select phone model
on options, check "use server","do full unlock"
enter yours username/password
back to a2 tab
press unlock
request placed in queue, wait some time (up to 72 hours), retry.
follow program instructions (power on phone, install modem drivers,etc)

- misc bugfixes


v0.914020/UNI
Tuesday, 18 December 2007

- sometimes setool2 hangs on "Starting up..." session. fixed.
thx to arash for reporting and hard testing.

- for fun added "phone branding" readout in identify.

update only (replace old exe starting from 018 version with new)


v0.914019/UNI
Monday, 17 December 2007

- A2 gdfs readout was incorrect from the beginning. fixed. thx,arash.
- pair of cosmetic fixes.


v0.914018/UNI
Monday, 17 December 2007

- fixed db2020 emptyboard filling (5 locks after emptyboard fill) bug. Great sorry for that.
- many internal rebuilds to reduce memory consumption,etc. so be ready for bugs.
- minor bugfixes
- added pnx5230 cid51 unlock by patch, change IMEI,
crossflashing, complete filesystem support.
both dcu60 and com/ufs are supported, while i STRONGLY recommend DCU60
method requires 1 credit.

( that is NOT "gti" method, if someone want to start blabling. Instead,i'm sure that all "lead developers" will use my way and loaders patched by me from that release ;) )

usage very same as CID49/CID50/CID51 db2012/db2020:
- check "use server", "alternative security bypass"
(that is mandatory), then
- if want to change IMEI - check
"unlock after flash",
"patch otp<>gdfs check in firmware",
"allow to change IMEI when unlocking"
- if want to unlock - check "unlock after flash"


v0.914016/UNI
Thursday, 6 December 2007

- added correct network unlock via patch for j110/j120 phones
(hehe, world first as far as i know ;) )


howto:
select phone model and press unlock.
power on phone, press <**<, enter any code.

if yours firmware unsupported for patch - you have two options
- read fullflash (start 0 len 3F0000), upload it to rapidshare and PM me link
- flash any firmware from support and do unlock

- ultrafast and ultrasafe userlock reset added for j1x0,k2x0 phones
(select model, press unlock)
- there is two new files in script folder
j1x0_total_reset.arm - flash it to TOTALLY reset j110/j120 phone
k2x0_total_reset.arm - flash it to TOTALLY reset k200/k220 phone
(calltime,usercode,pictures,settings,etc is reset)

- slight cosmetic changes that were requested by arash.

ps.
i will not do "unauthorized phone" repair and other eeprom errors for j110/j120 - for that use other tools - they deserving own peace of bread ;)


v0.914015/UNI
Thursday, 29 November 2007

- from now after first stage of cid52 security bypass user required to press "ready" to continue (will greatly helps when doing many phones at once, suggested by AlexG)

- "can't get packet props" after flashing should be fixed now (still unsure, cause can't repeat it 100% on mine phones, thx to vasilius for GREAT help during bug investigating)

- some minor bugfixes (yes, Arash, pda+ufs will be good now ;) )

hopefully next version will bring us corrected j110/j120 flashing and unlock. maybe even t250 will be supported (at least flashing/userlock reset) well, if all be well, A2 unlock by logs will be enabled too.


v0.914012/UNI
Sunday, 18 November 2007

- gdfs commands for A2 phones was broken in script processing. fixed.
- added experimental flashing support for j110/j120/k200/k220 phones (currently works flash,flash read,eeprom read)
- added experimental k200/k220 seczone repair (simlock remover) select k200/k220 model and press unlock to execute it. note. experimental. so pretty please use eeprom backup option.
- still more bugs ? hunt them ;)

complete set of latest j110/j120/k200/k220 flashes is available on support. soon will upload "ultraquick" langpack-only packages.


v0.914009/UNI
Sunday, 11 November 2007

- fixed slow phone search when doing second part of CSCA unlock
- fixed "can't open port err:006" after gdfs read
- several gui bugs fixed.
- still more bugs ? hunt them ;)

important.

i got two reports that a2 phones after flash go to infamous 5lock state. it is some bug in semc firmwares, because to solve that "locks after flashing", you need just power circle your phone.


v0.914007/UNI James Bond Release ;)
Thursday, 8 November 2007

- fixed MAJOR bug, which prevents almost all operations from work. (unlock by patch, cid49 operations, etc).

- fixed .vkp script processing

- added "complete phone" support for a2 phones. it writing generic custpack with all languages enabled. for PROPER complete - please use "normal" custpacks.

- still more bugs ? hunt them ;)


v0.914006/UNI
Wednesday, 7 November 2007

- SEMC A2 phones support added.
currently supported : flashing, gdfs read/write, scripting, userlock reset.
standalone, no server needed. network unlock will be added later (via server)
RED,BROWN phone domains supported.
only DCU60 interface supported.

new script commands:
taread:AAAABBBB
read TA unit (former gdfs), where AAAA= partition number, BBBB - unit
tawrite:AAAABBBBDDDD....
write TA unit (former gdfs), where AAAA= partition number, BBBB - unit,
DDDD.... data

note, that script command "readfile:" not supported by retail loader.
usually phone nicely works with dcu60 when attaching it with "C" button,
but there is some really old protos, which requires "2+5" buttons
(you should not meet such).


setool2 v0.91380096
Saturday, 18 August 2007

Code:
- added IMEI change via patch for cid50/51 db2012 phones. howto:
select needed model.
on settings, mark "use server","use alternative bypass",
"alllow IMEI change when unlocking","patch OTP<>GDFS check"
press UNLOCK, enter desired IMEI.
patch requires 1 credit.

note, that is FLASH PATCH, so it IMEI will change to original if you flash main part of firmware.


setool2 v0.91380095
Thursday, 16 August 2007

SEMC end release.

Code:
- added FREE db2020/pnx5230/db2012/PDA
custpack uploading/gdfs read/write/userlock operations.
you need CHECK use server (fill any login details) for it.
if you WILL CHECK "use alternative security bypass",
you WILL need credits.
note - cid49/cid51 UNLOCKING via flash patch still requires credits.


setool2 v0.91380094
Saturday, 4 August 2007

Code:
- finally i got P1 phone and so - P1 support added. supported flashing,gdfs read/write,usercode read. unlocking supported via special server (read: not supported)
- by request, during flashing phone on semc tab, file in misc. edit now can be script or package.
- other bugfixes and bugs.


setool2 v0.91380093
Friday, 27 July 2007

setool2 v0.91380093 Code:
"thieves" release.

- added IMEI change patch for db2020 cid49/51 phones.

alas, but universalbugz released IMEI change patch for db2020, and because of that i forced to release same on setool2. of course, setool2 solution has nothing common with universalbugz way (i even not know yet how they making their patch) and developed by myself in educational purposes long-long time ago.

please be certain, that you can use IMEI patch on own phone only for educational purposes,otherwise you breaking law and blablabla.

note, that it is NOT IMEI repair (security zone repair), but PATCH. it will NOT repair red blink phones and can only be executed on 100% working phones. if you flash main (update on seus) - OLD IMEI will be restored.

patch is working on all recent DB2020 firmwares. i have no idea and can't guarantee that it will work on new firmwares.
(well, i CAN guarantee that it will NOT work ;) )


now, howto. well, you already know how, if you ever tried
(of course, for educational purposes only) IMEI change for db2000/2010 models.

in short - you have 2 ways.

first way:
1. select model, on settings check "use altbypass","use server", "allow IMEI change when unlocking","patch otp<>gdfs check in firmware"
2. on semc tab press unlock. phone will be unlocked and you will be asked for new IMEI. cost - 1 credit.

second way:
1. select model, on settings check "use altbypass","use server", "allow IMEI change when unlocking","patch otp<>gdfs check in firmware", "unlock after flash"
2. on semc tab, select main,fsimage,custpack. press flash. phone will be flashed, customized, unlocked and you will be asked for new IMEI. same, 1 credit.


setool2 v0.91380092
Thursday, 26 July 2007

Code:
small bugfix update

- z530 "recovery" was broken,fixed.
- server error messages verbosity increased.
- some internal not important updates/fixes.


MT Box Alcatel - Alcatraz v5.4
Tuesday, 24 July 2007

Whats new:

- New C630/5 versions supported for read codes

Note:

New users need to download and install Alcatraz v1.8 then download and install Alcatraz v5.4 update.exe Existing customers need to download and install Alcatraz v5.4 update.exe only


setool2 v0.91380091
Wednesday, 27 June 2007

-added PDA brown cid36 to red49 conversion
(use eroms\pda_ccpu_convert_red49_signed_brown36.zip)
- fixed AnyCID db2012 flashing with altbypass used
(f.e. when using cid52 flashes in cid51 phones)
- fixed brown cid49/cid51 file operations (amazing - somebody using it )
- cosmetic works


setool2 v0.91380089
Tuesday, 19 June 2007

Code:
- added possibility for converting BROWN PDA phones to RED.
howto:
     1. go to PDA tab.
     2. select MODEL (any will do job)
     3. uncheck all settings on settings tab.
     4. add to firmware packages eroms\pda_ccpu_convert_red49.zip
     5. press flash.
     6. your brown prototype phone ready to run with latest firmware.
(thx going to arash for remote testing on his own brown PDA.)


- updated db2020 bypass loader, thus fixed bug with occasional flashing stalls, when altbypass option enabled.
- misc cosmetic works.


setool2 v0.91380086
Tuesday, 19 June 2007

Code:
- added db2012 brown cid51 support
(use eroms\db2012_erom_redcid51.ssw to convert phone to retail)
- during csca unlock PDA phones will switch to "normal mode" automatically
(well, at least they should - tested on m600/p990/w950)
- "old security" pda bypass speed increased
- other minor improvements/bugfixes


setool2 v0.91380084
Saturday, 2 June 2007

Code:
- due multiple user requests, added REST file checking (press "identify", free)
- due same reason added auto-seczone-backup feature
(only when dcu60 used, press "identify", stored in backup\%imei%\, free)
- enhanced altbypass behaviour when using com/ufs interface.


setool2 v0.91380083
Friday, 25 May 2007

- added PNX5230 CID52 flashing/usercode reset/network unlock
(via special server)
- added PNX5230 identify (defeated lazyness at last)
- added normal e-gate vista drivers (tested and working 100%)
- updated emptyboard support for "new security" db2012 chips
- some minor "cosmetic works"


v0.91380081
Saturday, 12 May 2007

- db2010 cid50/51 phones must work okay now
(do main+fs+custpack+unlock_after_flash combo if there is no rest files)
- more "foolproof" work with "alternative security bypass" option added
- some cosmetic things.


v0.91380080
Saturday, 12 May 2007

- db2012 com/ufs csloader operations (i.e. "complete")
was broken on normal speeds (dcu60 interface worked ok).
that is fixed.

- a lot of users, when doing "erom upgrade"
(required to avoid err:30 on altbypass), forget to uncheck
"alt bypass" option and lose logs without result.
altbypass is ignored now when doing "recovery".

so far no other bugs were discovered.


v0.91380079
Wednesday, 9 May 2007

- added cid 49/50/51 alternative security bypass for db2012/db2020 phones.
what that means ? that means, you can unlock with flash patch
ALL cid49/50/51 DB2012/DB2020 phones.
all you need - VALID ACCOUNT WITH 1 (ONE) LOG, click here to see credits resellers
check "user server" and "use alternative security bypass",
then press desired operation.
of course, scripts is FULLY supported in THAT MODE.


v0.91380077
Tuesday, 17 April 2007

- "err: 10" error when z530 recovery operation executed fixed.
- customization packs now parsed when selected (shows language info,etc)
- added phonebook extraction from gdfs .bin format dump (NOT SSW).
usage is simple: select .bin file into misc. files edit, gdfs will be
parsed and .vcf file will be created.
phonebook unit is courtesy of PANUA, thx to him.
- all CID>50 now assumed to be used with auth dongle, to prevent credits loss.
- identify working now on USB interface
(in some cases reduced loaders are used, warning is displayed in such case)
- some other not important fixes (bugs ? ;) )


GUI v0.91380076
Monday, 26 March 2007

- corrected pnx5230 (z310) CSCA handling to prevent log loss and phone "damage". once again i remind that pnx5230 using same security as db2020 and we limited now to flashing and userlock reset (until we find some way to run server)
- included cid49_51_to_cid52 conversion. better not use it... really.

WARNING. DUE MISTAKE, FIRST 076 VERSION WAS
RELEASED WITH SERIAL CHECK ROUTINE ENABLED.
IT IS REPLACED NOW WITH "NORMAL" VERSION.

SO EVERYBODY, WHO DOWNLOADED 076 AND RECEIVED
"WRONG SERIAL" ERROR - REDOWNLOAD DISTRIBUTIVE.

SORRY FOR THAT AND THX FOR UNDERSTANDING

K810 r1kc001 CID52 firmware and customization packs uploaded
K790 r1cc003 CID52 firmware uploaded
K790 r1cg001 CID52 firmware uploaded
K790 r1eg001 CID52 firmware uploaded
K790 r1gb001 CID52 firmware uploaded
K790 r1jc002 CID52 firmware uploaded
K790 r1jg001 CID52 firmware uploaded ( K790 customization packs updated. )


GUI v0.91380075
Thursday, 22 March 2007

- added db2020 cid52 server support (flash,erom upg,usercode reset, network unlock (when we will restore server functionality))
- added db2012 cid51 server support ( flash,usercode reset, network unlock)
- added pnx5230 (Z310) cid51 server support (flash,usercode reset, identify NOT supported yet,network unlock (when we will restore server functionality))

- now all simlock types displayed in identify (state shown only if lock is locked)
- changed .ini file handling, so you must again rebuild settings. now settings for phones COMMON for all windows, beware. from now on settings will be intact when new models will be added.
- added new phone model names
- many internal changes,so please check for bugs.

w200 r1gb001 cid51 firmware uploaded
z310 r1jc002 cid51 firmware uploaded
k610 cid52 firmwares uploaded
k800 cid52 firmwares uploaded
w850 cid52 firmwares uploaded

db2020_firmware_in_gdfs_format added in distr.rar for completely blank boards. phones.rar updated with z310 driver for csca unlock

IMPORTANT ADDON. SADLY TO SAY (BLAME ME) -I NOT CAREFULLY ENOUGH
LOOKED AT Z310 - SO - DO NOT NETWORK UNLOCK Z310 - IT WILL BE DEAD.
OF COURSE, YOU CAN ALWAYS RESTORE IT TO "LIVE" WITH SECURITY BACKUP,
WHICH IS DONE AUTOMATICALLY IN "BACKUP\%IMEI%\%IMEI%_%DATETIME%.SECZONE"
YOU NEED WRITE IT AS SCRIPT.


GUI v0.91380073
Wednesday, 28 February 2007

GUI v0.91380073

- changed csca unlock step1 behaviour. now, if there is ANY *.seczone files in %setool2%\backup\%imei%\ folder,step1 (erasing locks and writing signature) is skipped and step2 executing immediately. That is done to prevent credit loss if on step2 phone drivers installed incorrectly or if server connection broken on previous attempt of step2.

if you ABSOLUTELY know what are you doing - you can erase *.seczone files from %setool2%\backup\%imei% and step1 will be executed again for that phone.

- added "dummy battery" option for UFS cables with "crocodile" or otherwise called "dummy battery". if you check that option - before each phone shutdown we will execute grace delay to allow phone loader finish its work (for example, without that option you CAN get a "configuration error" on phones after flashing them using UFS and cable with dummy battery). grace period length is 5 seconds by default, but it can be changed with option "ufs_dummy_delay" in [main] section of setool2.ini (period counted in ms, so ufs_dummy_delay=5000 is 5 seconds)

- very minor ui bugfixes.


GUI v0.91380072
Monday, 26 February 2007

GUI v0.91380072

- made 5-times retry of each AT-query during csca unlock step2 (should help when phone drivers installation not finished)
- locks tab not works correctly when USB was used as selected interface
- some cosmetic fixes


GUI v0.91380071
Friday, 23 February 2007

GUI v0.91380071

first, and most important news.

you are not required now to register on support or use login/password to login on support area.

all you need - download software from www.setool.net, install drivers and press GO SUPPORT button.

- added some missed models...
- fixed some cosmetic bugs


GUI v0.91380069
Saturday, 17 February 2007

GUI v0.91380069

- profiles now correctly load settings for models when switching only tabs.
- return to old scheme cid/color detection for db2020 usb operations (some users reports that phone COLOR/CID can't be detected)
- added some models (w880,k550) so yes, yes. you must again remade profiles.
- db2020 empyboard filling supported (because i saw my "friend" on kukuruzer
takes money for that,while it is standalone process and not requires any special moves, that is unfair and i shall fix it). quick howto:
-go to empty tab
-select ANY db2020 model
-fill desired IMEI (or not fill if you have not want to write it)
-check WRITE OTP (or not check if you not want to write it)
-select CID49 (required)
-select needed brown2red erom
-press FLASH
-phone now complete retail (especially if you wrote otp) and must be serviced as any retail db2020 phone (note - NOT USE EROM UPGRADE)


GUI v0.91380068
Tuesday, 13 February 2007

GUI v0.91380068

mostly it is cosmetic release, but some intresting things added.

Code:

- added strings for several "missing" db2020 models. semc model list sorted ;)
- changed csca unlock stage 2 behaviour - it will search phone now until phone will be found or until you press stop. that must help save credits for some ppl.
- changed PDA detection. must be better and faster now. (remember : attach PDA only when you told to do so)
- changed script command "gdfsread" behaviour - now if you read several gdfs units from script, all units will go as one file named %imei%, instead of old "one file per one unit" behaviour
- setool2 will now save full session logs in directory "logs"
- updated patch-loaders from DB2010/DB2020 (white screen "solution")
- other cosmetic fixes, more info displayed sometimes,etc.
- new bugs, of course. waiting for reports to fix it ;)


GUI v0.91380066
Wednesday, 7 February 2007

GUI v0.91380066

- during csca unlock we now enumerate only present ports (to be more simple - stage 2 of csca unlock became faster in most cases)
- J220/J230/Z300 phones with "new" security supported (7-digits lock numbers)
- DB2020 CID51 full identify support
- DB2020 CID51 EROM upgrade
- minor bugfixes.


GUI v0.91380065
Tuesday, 30 January 2007

GUI v0.91380065

- public testing of db2020 phones reveals a error:

if you, in same window, unlocked any NOT db2020 phone and then attempting to unlock db2020 phone - you will loose 1 credit and phone will be in "red blink" state after second step. of course, backup is created, so you can restore phone back to "live state. received signature is correct too, so yours 7 creds is not wasted. such thing has been fixed in current version.


GUI v0.91380064
Sunday, 28 January 2007

GUI v0.91380064

- it was reported, that on some rare db2020 phones you got following error

Code:
loader unlock: executed
Backup security data...
var not exists
Fail
Elapsed:22 secs.
it has been fixed.

SEtool2
http://setool.net/common/v0.91380064.rar


GUI v0.91380063
Sunday, 28 January 2007

GUI v0.91380063

- sadly,but in v0.91380063 DB2020 OTP CID51 support was broken, fixed
- added SERVER-BASED FULL PERMANENT DB2020 UNLOCK. how to use.

select USB as interface. that is REQUIRED.
select K610 as phone model (or any other DB2020 model, they are same)
settings - check "use server for csca unlock/flash", "do full unlock instead of usercode reset for db2020", fill your login details.

back to semc tab, press unlock, attach phone with pressed "C" (or 2+5) buttons.

wait for signature calculation, it can took about 2 minute.
if calculation will fail, your credits will NOT be deducted.
if calculation is success, then signature will be saved in backup\%imei% folder in your setool2 directory.

next, backup will be created so you will be able to restore phone if something will go wrong (hardly believe, but who knows...)

next, you will be prompted to detach phone and turn it on. do so.
detach phone.
turn it on FULLY
phone will be on 5 locks, that is normal.
connect phone to usb.
if phone will ask you switch to phone mode - switch to phone mode.
it can ask you for drivers,if you not installed them previously.
install all drivers (links below)
be SURE that you install all drivers correctly.
press "testpoint ok"
procedure will continue,phone will be switched off and unlocked.

remember, if something will go wrong - you have a backup of security units.

cost of DB2020 unlock is 12 credits.
currently, BOTH servers are supporting DB2020 unlock

as usual, credits will NOT be recovered in case of connection failures.

NOTE! there is STILL REMAIN SERVER-BASED USERCODE RESET FOR DB2020.
it will work, if you UNCHECK option "do full unlock instead of usercode reset for db2020" and press UNLOCK.

because of recent problems with sql server on support area, i will post links to new version and phone drivers here. hosting provider are informed about probles and, hopefully, they will be solved.

phone drivers
http://setool.net/common/phones.rar

SEtool2
http://setool.net/common/v0.91380063.rar


GUI v0.91380062
Thursday, 25 January 2007

GUI v0.91380062 - otp<>gdfs imei check now supports latest pda firmware - some internal changes


GUI v0.91380061
Monday, 15 January 2007

GUI v0.91380061

- cosmetic - fixed error message during lg unlock.
- cosmetic - wrong chipid (connections problems) filtered now.
- addon - added workaround for white screen problem on db2010 sibley-based phones with ST flash and db2020 phones with ST flash.
note - that is not panacea. it will only help SOMETIMES. usage is very simple - just full flash white screen phone with latest fw version using 061 setool2 version.

rest files archive finally synched with latest rest files. if you already downloaded all rest files from news thread - you not need download rest archive.


GUI v0.91380060
Sunday, 7 January 2007

GUI v0.91380060

- added support for DB2020 CID51 operations (flash,read/write gdfs,script,uselock reset,well, all standart operations)
- "unlock after flash" incorrectly works with sharp3g phones USB flashing. fixed.
- "unlock after flash" for lg3g+testpoint now recalc security automatically.
- misc minor bugfixes.


GUI v0.91380058
Thursday, 28 December 2006

GUI v0.91380058

- bugfix. sometimes (very-very rare readout in ssw format was incorrect). fixed. ( thx goes to vascoff for reporting bug )

- added csca-based unlock for NEW PDA revisions and K320 (well, you can use it for all other models, except db2020-based, but it will be waste of credits)

how-to.

1. insert DCU60 (only that is supported for csca unlock) in TURNED ON PHONE
2. install drivers. included drivers for PDAs (drivers\hermione) and for K320 (drivers\k320_usb_signed_drivers)
3. turn off phone, disconnect it
4. select needed model
5. check "use server for csca unlock/flash"
6. press unlock
7. when prompted, detach phone, turn it on and insert cable
8. wait until all drivers appears
9. press testpoint ok - phone will be unlocked.

notes

- csca-unlock only supported on .198 server
- csca-unlock will NOT cure yours phone if you wrote to it GDFS from other phone
- csca-unlock will only work stable and good on DCU60

for now price for csca-unlock 5 credits
csca-logs are rare, so they will periodically deplete, while flashing-log are still be online. i will inform about it in log-info thread


GUI v0.91380057
Saturday, 23 December 2006

GUI v0.91380057

- critical bugfix
- support was broken for all CID49 DB2000 phones. fixed. thx to duzz for report.


GUI v0.91380056
Saturday, 23 December 2006

GUI v0.91380056

- P990 chinese-based flashfiles failed on USERDATA part. fixed. (chinese flashes updated, you MUST re-download them)

- i decided to reveal some feature for PDA phones. story:
SEMC PDA phones has two revisions of chips. "new" and "old".
"new" revision has changed security system and can not be made standalone.
"old" revision has just impoved security and can be breached.

so, as small present in upcoming new year, you have now opportunity to work FULLY (rebuild security (unlocking), change IMEI, read/write gdfs, change CDA) with OLD REVISIONS of PDA (and there is a LOT OF THEM) WITHOUT SERVER.

for that, first, you need determine security type (press identify, i attached two screens with old and new security)

if security new - bad luck.
if security old - uncheck use server and do whatever you like

rest files attached, extract them to rest folder.


GUI v0.91380055
Tuesday, 19 December 2006

GUI v0.91380055

- user lock was incorrectly displayed if digit numbers uneven. fixed
- lg3g patching will be faster on SOME firmwares.

- added SERVER-based support for FLASHING, standalone support for usercode read for new SEMC smartphones
- m600/m608/w950/w958/p990.

carefully read instruction - that will help you NOT to kill expensive thing.

instructions.

first, you need download needed firmware package.
add it to firmware area on smartphone tab.

check "use server" and enter your login/password.

now, you need install drivers for flashing.

for that, poweron smartphone in fw update mode.

- for p990/m600 press and hold "@" on TURNED OFF phone, then attach dcu60.
- for w950 press and hold "C" on TURNED OFF phone, then attach dcu60.

windows will ask you for a drivers. drivers in %setool2 dist%\drivers\HermioneDrivers. i attached a picture how correctly installed drivers must look in device manager.

now, you can press desired operation.

identify - to readout phone information (and userlock)
flash - to flash package.

!note. there is a checkbox named "process PDA update files" if you UNCHECK it - NO CREDIT WILL BE DEDUCTED from your account, but CDA will be UNCHANGED in phone. you got me ? ( got, lol ) yes, that is FREE FLASHING.

!note. if you flashing multiple smartphones, BE SURE THAT DRIVERS ARE INSTALLED BEFORE starting desired operation.

read gdfs - read gdfs for different things.
write gdfs - write gdfs back.

!note. if you write gdfs from other phone, say bye-bye to yours expensive pda.

well, enough.

lets flash'em.

ps.
p990 flashes will be uploaded in next day-two.


GUI v0.91380054
Saturday, 16 December 2006

GUI v0.91380054

- K320 SERVER support added
- FREE USERCODE READ added (press identify) - works for db2000/2010/db2012
- misc. bugfixes
- new bugs (hope not )

K320 R4EA031 firmware and customization packs uploaded.


GUI v0.91380050
Saturday, 9 December 2006

GUI v0.91380050

- bugfix. somehow i broke completely red49 support for k750/z520 series. fixed.


GUI v0.91380049
Saturday, 9 December 2006

GUI v0.91380049

some stable ( ) release and some NEW features.

- fixup for some db2020 mobiles booting (err:36 and so on) - fixup for some sibley-based (w300/k310/k510/w300/z550/w810) flash break
- new feature. red cid49 phones (db2000/db2010) can now be flashed via USB with ENORMOUS FAST speed using usual dcu60 cable (or miniusb for k600/z800). FROM NOW NO ONE CAN SAY "my XXX box flashing faster than yours setool2" supported ONLY RED CID 49 PHONES.

there is several restrictions.
first.
UNLOCK is working. BUT if yours gdfs is damaged (rewrited from other phone) - you REQUIRED to use com/ufs connections to repair security values.
second.
IMEI change not working because of same reason.
third.
EROM must be intact in order for USB flashing work.
fourth.
no more restriction.

some timings:

fullflash of w810 phone - 360 seconds. (about 700 by uart)
fullflash of w900 phone - 733 seconds. (about 1400 by uart)


GUI v0.91380047
Tuesday, 5 December 2006

GUI v0.91380047

interim fixup release.

- critical bug fixed - on some db2020 phones (diff hw ???) flashing was terminating with "subblock NAK" error. should be fixed.
- db2020 identify now displays all information about phone state.


GUI v0.91380046
Thursday, 30 November 2006

GUI v0.91380046

interim fixup release.

- cosmetic addons, like "unused" buttons disabled now when needed
- CID change lower than original and color change if OTP locked prohibited.
- critical bug fixed - on all sibley based phones, if you set "unlock after flash" and "complete phone" - gdfs startup was stalled. thx to vasilius for reporting and help in finding and eliminating bug.
- added several gdfs in bin format.
- other internal updates.
- m600/w950 support will be ready really soon....


GUI v0.91380044
Saturday, 25 November 2006

GUI v0.91380044

interim fixup release.

- added support for z300/j220/j230 renesas flash (mfgid:1c)
- script with files references now must correctly executing from any directory
- simlock codes now random during unlocking
- countless internal tunings/fixups/preparations.
- new bugs, and i hope you help me to find them


GUI v0.91380043
Wednesday, 11 October 2006

GUI v0.91380043
- added usercode reset for db2020 phone. Requires server credits.

how to use - two way
first way good when doing only usercode reset
- check "use server".
- select correct model
- press unlock. usercode will be resetted to 0000

Second way good when flashing.
- check "use server"
- check "unlock after flash"
- check "complete phone" if you need it
- select correct model
- press flash. phone will be flashed and user code will be resetted to 0000


UI v0.91380042
Monday, 25 September 2006

UI v0.91380042

that is very beta, main target is support "new" flash chip in z300/j220/j230.
"new flash symptom" was "empty" codes when reading and garbled flash readout, unabilty to flash.
hopefully, all of that was fixed, but need checking. support was done blindly,so ... you have been warned.
please, try "unlock" first, and only if it works try flash.
"unlock" CAN NOT kill your phone
once again, i have no response for dead phone - THAT IS TEST version.

New feature is ".vkp" support. .vkp is patches, maded by different persons to tune your phone. those who need that patches know where to get them.
Soon i will made a .vkp request thread here and will ask some famous patchers to visit that thread.
Usage simple - put .vkp file in misc. edit and press write script.

Sibley-based (w300/w810/k310/k510/z550) emptyboards support was flawed, fixed.
as i remember - locks were incorrectly written, should be fixed.

rest.rar updated with latest restoration files.


GUI v0.91380041
Thursday, 14 September 2006

- added brown to red db2020 conversion.
how to use.
UNCHECK "USE SERVER"
first, be sure your phone is cid49. (press identify and read "flash cid:49")
if not, go to "Empty Fill" tab, select CID49, press recovery - phone will be brown cid49
next, convert phone to red.
select correct model, select correct conversion EROM
(example - phone is k610, conversion EROM is eroms\k610_erom_cnv_brown2red.cry )
press flash.
your phone is read and ready to flash using credits system.
( because of obvious reasons filesystem read not supported for brown 2020,unlocking is not supported for brown 2020,well... only flashing possible )

- profiles auto load at startup now
- misc loaders updated
- recovery procedure for z530 updated a bit.

k790 r1ed001 firmware uploaded.
k610 r1ed001 fimrware updated.


GUI v0.91380040
Wednesday, 6 September 2006

GUI v0.91380040

- protector update, now setool2 must co-exist with KAV
- it has been found, that in Z530 EROM not HW protected.

Because of that,possible to revive Z530 phones with damaged erom.
How to do:

on semc tab, select z530 in model list.
press recovery.
phone will be recovered and attempt will be made to repair EROM.
most possible, you will need to reflash phone in order to get it fully working.

warning. if you select z530 and will use recovery with k310/k510/w300/w810/z550 phone - you will receive dead brick. it is only usable for current breed of Z530 phones


GUI v0.91380039
Friday, 1 September 2006

GUI v0.91380039

- SEMCsec released EROM updater for db2020.
it can help with red blink and "gdfs startup error:29" on db2020 phones.
it can't help to repair damaged security units.
it only works on com/ufs cables.

how to use - settings, set USE SERVER.
semc tab - select phone model
press recovery.

erom must be upgraded and possible your problem solved.

- some fixes in com cables and db2020 booting
- card unblocking not works as intended, fixed.


GUI v0.91380038
Monday, 31 July 2006

GUI v0.91380038

- nested directory creation during package restore was broken, fixed.


GUI v0.91380037
Thursday, 27 July 2006

GUI v0.91380037
- by mistake, phone repowered during complete, fixed.
- profiles now saves settings separate for every model in every window.
- some other ll test improvements...

edit:
accidently broken testpoint usage fixed, reuploaded. (gmt+3 21:32)


New card version of the standalone (v0.91380036)
Wednesday, 19 July 2006

New card version of the standalone (v0.91380036) is out! Download it from the Downloads section.
- change - added "support" for nice tool of arash (simple put his exe in directory and press E)
- bugfix - setool2 not working properly under dead os (win95/98/me).fixed.
- bugfix - some cosmetic low-level fixes


New card version of the standalone (v0.91380035)
Tuesday, 18 July 2006

New card version of the standalone (v0.91380035) is out! Download it from the Downloads section.
- change - added server-based db2020 model (k800,v630,k610) flashing
- bugfix - misc bugfixes.
- bugfix - rest files updated, was some errors in k600 rest files.


New card version of the standalone (v0.91380034)
Friday, 7 July 2006

New card version of the standalone (v0.91380034) is out! Download it from the Downloads section.
- bugfix - during flashing many phones at once software freezes.
- bugfix - lg3g patching code impoved to support some of latest fw.
- bugfix - with selected "w550/w600 old" complete not worked. fixed.
- bugfix - during ssw conversion of small files GPF occured
- bugfix - rare occuring bug during imei patch for w300/z530/w810/k510/k310 fixed
- bugfix - locks operation for for w300/z530/w810/k510/k310 fixed


GUI v0.91380033
Wednesday, 5 July 2006

GUI v0.91380033

- bugfix - during flashing many phones at once software freezes.
- bugfix - lg3g patching code impoved to support some of latest fw.
- bugfix - with selected "w550/w600 old" complete not worked. fixed.


GUI v0.91380032
Saturday, 1 July 2006

GUI v0.91380032

as i promised, complete low-level rewrite is here.

many bugfixes, hopefully, not much new bugs.

changes:

- packages now simple zip files( backward compability with .pkg not maintained,sorry). That allows to use original semc customization packs and easy maintain any OWN customization pack for usability added possibility to write package after flashing. If anything selected in "misc.files" field, it is threated as package and we try to write it into phone after flashing process. Note ! if you write original customization pack, you don't need do complete

customization files available on support. will add more models soon.

- fast imei patching added. works for all firmwares of semc,lg and sharp,which i have (and i have a lot of them). to use it there is plenty of ways:
1. check "patch otp<>gdfs check in firmware" , check "allow to change imei when unlocking" and press unlock
2. check same + "unlock after flash".press flash. phone will flash selected files, then will patch imei check and unlock/repair phone. yes, imei patch works for w810/w300/k310/k510/z530

- i waited and waited, but nobody from semc "developers" came with patching of new firmware versions for sharp 703/903. so i tired of waiting and made it. Let they steal (as they usually do) and learn how to do things right. yes,yes - direct flash patching of new firmware versions added. sadly, i still can't get red73 loader (and i think will not get it for a loooong time), so you must use testpoint. it is not hard and safe, if use usb cable instead battery and be careful with needle.

- empty board handling changed. now, all you need to do is on empty board tab - recovery with brown cid49 ,enter IMEI, select erom if needed, select gdfs_in_ssw_format and press flash. after it, phone will be usual phone and must be handled in semc tab.

- my friend vasilius draw more user friendly GUI.

- profiles now auto-load when model changed. models slightly separated.

- connect ufs removed, now ufs simple another communication port

- latest ufs cables for k750 has one uart only, they not work at high speed when completing phone. it must be fixed now.

- unicode support when reading and writing files.

- MNC2/3 selectable support added in locks.

- updated drivers for ufs and 4in1 cable.

- other minor and major bugfixes and changes.

download at support and report bugs and wishes.


GUI v0.91380031
Saturday, 24 June 2006

GUI v0.91380031

- now you can really flash any CID flash file in any CID phone.
- some bugfixes

ps.
i'm going to complete rewrite setool2 on normal compiler.
prepare for many bugs and sone intresting features


GUI v0.91380030
Friday, 9 June 2006

- there was a problem - if you checked "unlock after flash" and flash lg3g red41/42/54, after flash  phone was dead (need to unlock with tp afterward). that issue was fixed , it works like designed now.

- internal rebuilds, preparing for db2020 unlock and flash support.

IMPORTANT INFORMATION

SEMC, by error, released some number (BIG) of BROWN w700 with LOCKED OTP

when flashing, that phones will produce such errors:

Code:

.......
CSloader version:
060118 0312 EMPCXC1327364_COMPACT_SEMC_CS_LOADER
loader startup: executed
wrong responce, break.
loader filesystem startup failed, that is fatal

YOU NEED TO FLASH SPECIAL EROM from eroms\w700red_erom.ssw.cry and AFTER flashing that erom repeat complete sequence.

flashing any other EROMs will bring you to testpoint.


GUI v0.91380028
Thursday, 25 May 2006

- on some systems "protection error" appears, while older versions work ok. must be fixed.
- some lowlevel tuning


GUI v0.91380027
Thursday, 18 May 2006

- Finally j220/j230 fully working and tested (read codes/read flash/flash firmware)


GUI v0.91380025
Wednesday, 17 May 2006

- fixed "readdir" command - full support for w700 added - from now on restoration files will be distributed separate from main distribute. that is done for cases when only main or only rest files updated.(you need BOTH rest files package and main package)

PS:You CAN flash w700 fw into k750.but no single advantage and you will lose camera even if manually replace camera driver - it still refuses to work.


GUI v0.91380024
Tuesday, 16 May 2006

GUI v0.91380024

- added experimental support for j220/j230 phones. not tested , but must work.There is only pair of flashes for test. after (not) successful tests will add all other.
- fixed incorrect work of command "readpkg","readdir" when single root directory specified.
- rest files package synched with current rest files


GUI v0.91380023
Saturday, 13 May 2006

GUI v0.91380023
- readflash fixed- some very internal problem fixed, hopefully damned exists will disappear.- updated rest files- added w550 gdfs in ssw format download from support area.


GUI v0.91380022
Saturday, 13 May 2006

GUI v0.91380022
- added read files functionality for z530/w810 phones. some speedup,heheh.
- bugfixes (i not remember exact what i fix, maybe some ignition probs,maybe not)
- raw z300 support added (read codes,flash,read flash, read/write nvram). latest flashfiles for z300 uploaded at support.please note. if you will write in yours z300 FULL readout from other z300 - it will go dead and only emma3 (at present) will resurrect it. if you will write in yours z300 NVRAM from other z300 - it will became zombie too.if you somehow manage to damage boot area (0x0++0x10000) - your phone is complete junk, can't be repaired NEVER. from my side, though, i done all possible so you CAN'T write boot. so, you have been warned.


GUI v0.91380021
Thursday, 11 May 2006

GUI v0.91380021
- CRITICAL bug fixed - db2000 red49 phones unlock was broken, which resulted constant "5 locks". fixed. (sometimes even bad thing is good.probably fixing that bug will help me to make lg3g red41/42 scrc fix without tp ) - updated rest files, added z530/w810/k750 gdfs in ssw format (frec folder)


GUI v0.91380020
Wednesday, 3 May 2006

GUI v0.91380020
- fixed issue with UFS "dummy battery" cable, which CAN bring to dead red49 phone (can only be resurrected by tp).probably that fix will brings more safe red49 operations.

- slightly updated rest files.
- different not important issues.
download at support.


GUI v0.91380019
Tuesday, 2 May 2006

GUI v0.91380019

- added, FIRST IN THE WORLD, complete support for red49 w810/z530.no-tp, of course. so. now setool first (as usual) supports all red49 phone line.

- updated restoration files.
http://setool.net/dist.rar

- flashes with most recent w810 and z530 is on support.

note:
- if you damage your erom - that version will NOT help you for any red49 phone.

A note to universaldongle
- look at my work, steal it,use it - but know - you are always no.2 on scene.
same applies to other developers, who NOT came with w810 no-tp until now.


GUI v0.91380018
Friday, 21 April 2006

- probably fixed db2010 cid49problems (w550, error "bootloader not responds").
  (note, it is not means that phones, killed by recovery can be repaired without tp with that
  version, it is only for those phones, which "hangs" on bootloader sequence)

- added support (experimental) for red49 k750/w800 phones. no rest files for them at moment

- means you must reflash phone completely. of course, you can create own rest files, as usual.

- changed rest files behaviour . now, if "rest. file" edit is empty, program attempts to auto-search
  for version and auto-restore it from rest folder.

- changed EROMs for new db2010 models (to prevent phone death after change certificate)

- as usual, fighting with execryptor bugs (quits,crashes,etc)
- fixed other minor bugs.

- added new bugs (not know yet where and what )


Welcome to SE Tool 3 Box Official Website
Tuesday, 11 April 2006

Welcome to SE Tool 3 Box Official Website


New card version of the standalone (v0.91380034)
Tuesday, 4 April 2006

New card version of the standalone (v0.91380034) is out! Download it from the Downloads section.
- bugfix - during flashing many phones at once software freezes.
- bugfix - lg3g patching code impoved to support some of latest fw.
- bugfix - with selected "w550/w600 old" complete not worked. fixed.
- bugfix - during ssw conversion of small files GPF occured
- bugfix - rare occuring bug during imei patch for w300/z530/w810/k510/k310 fixed
- bugfix - locks operation for for w300/z530/w810/k510/k310 fixed


GUI v0.91380017
Tuesday, 4 April 2006

GUI v0.91380017

New Bugfix release.
fixed some bugs, possible solved HT problem, some memory leaks.. nothing usual.


GUI v0.91380015
Friday, 24 March 2006


GUI v0.91380015
- comport routines changed completely. need detailed test
- added very raw locks handling. only for those who needs it.
- fixed w900 gdfs write option
- fixed brown49 handling
- fixed numerous internal bugs,some ui improvements..
- new bugs added

a note about comport ignition... reminder - if phone not begins to boot, not stop program, but disconnect cable, remove battery, insert battery and attach cable....


GUI v0.91380013
Thursday, 16 March 2006

GUI v0.91380013
- csloader was broken when using testpoint on db2010 cid49 phones. fixed


GUI v0.91380012
Wednesday, 15 March 2006

GUI v0.91380012
- tuned ufs
- reverted to old comport routines (although they not perfect, they work)


GUI v0.91380010
Tuesday, 14 March 2006

GUI v0.91380010

- fixed IMEI changing with w900
- tuned communications with comport, fixed NAK-errors
- added "Identify" for brown phones


GUI v0.91380011
Tuesday, 14 March 2006

GUI v0.91380011
- fixed ufs ignition with new drivers (i tested on 3.01.04)
- fixed identify
- again tuned com routines
- disabled recovery for all red49 phones (too much users killed their phones with it)
- returned old way for w550/w600 handling

notes on db2010 red49 support. seems, new method is half-working on db2010 phones.

now, there is two w550 in model selection - old and new.

try first old, then, if it will not work - try new.

if new will not work too - only tp.


GUI v0.91380009
Monday, 13 March 2006

GUI v0.91380009
- added FULL RED CID49 NO TESTPOINT support for NEW W500/W600, NEW K600/V600/K608, W900, see notes below
- updated "direct flash patching" for new sharp 703/903 firmwares
- testpoint usage allowed on sharp phones now
- testpoint usage reduced during operations
- added profiles support
- added "phone id" button (test cable, recognize phone cid,etc)
- slightly tuned ignition on ufs/com/dss - must be better
- fixed imei changing problem on w550/w600 in no-tp mode.
- some other internal modifications
- new bugs (unknown yet)


GUI v0.91373018
Sunday, 12 February 2006

GUI v0.91373018
returned to old version of execryptor.


Email
Password


          Home   |   Products   |   Accessories   |   Gallery   |   Reseller   |   Support   |   Updates
             Copyright?006. Setool3-box.org. All right reserved.
           Shopping at IPMart Network         Phone Unlocking Forum

SPONSORED BANNERS